Mélangeur audio vidéo Roland VR-50HD

Description

Ce mélangeur dispose de plusieurs fonctionnalités, il rassemble dans un seul boîtier les fonctions de mixeur audio, mélangeur vidéo, un écran tactile multi-visionnage et le streaming audio et vidéo en USB.

Le son et l’image est contrôler par une seule personne grâce à des faders, des boutons et un écran tactile.

CARACTÉRISTIQUES :

Video

Processus

4:4:4 (RGB), 10-bit

4:2:2 (Y/Pb/Pr), 10-bit

Connecteurs d’entrée

3G/HD/SD-SDI: BNC type x 4 (INPUT 1–4)

* Conforms to SMPTE 424M (SMPTE 425M-AB), 292M, 259M-C. HDMI(DVI-D): Type A(19pin) x 4 (INPUT 1–4

* HDCP Supported.

Analog RGB/HD-Component: Mini D-sub 15-pin type x 2 (INPUT 1–2)

Analog Video (SD): Composite (BNC type) x 2 (INPUT 1–2)

* INPUT 1-2: Select SDI, HDMI or Analog RGB, Composite using menu.

* INPUT 3-4: Select SDI, HDMI using menu.

Connecteurs de sortie

3G/HD/SD-SDI: BNC type x 2 (PGM OUT, AUX OUT

* Conforms to SMPTE 424M (SMPTE 425M-AB), 292M, 259M-C HDMI(DVI-D): Type A(19pin) x 3 (PGM OUT, AUX OUT, MULTI VIEW

* HDCP Supported Analog RGB/HD-Component: Mini D-sub 15-pin type x 2 (PGM OUT, AUX OUT)

Niveau d’entrée/sortie

Composant: 1.0 Vp-p 75 ohms

Analog RGB: 0.7 Vp-p 75 ohms (H, V: 5 VTTL)

Analog HD: 1.0 Vp-p 75 ohms (Sync-Signal: Bi-Level/Tri-Level)

Format vidéo pris en charge

SDI

480/59.94i, 576/50i, 720/59.94p, 720/50p, 1080/59.94i, 1080/50i, 1080/59.94p, 1080/50p

* Conforms to SMPTE 274M, SMPTE 296M, ITU-R BT.601-5.

HDMI:(*2)

480/59.94i, 576/50i, 480/59.94p, 576/50p, 720/59.94p, 720/50p, 1080/59.94i, 1080/50i, 1080/59.94p, 1080/50p 1024×768/60Hz(*1), 1280×720/60Hz(*1), 1280×800/60Hz(*1), 1280×1024/60Hz(*1), 1400×1050/60Hz, 1920×1080/60Hz

HDMI(MULTI-VIEW Output):(*2)

1080/59.94p

Composant

480/59.94i, 576/50i, 480/59.94p, 576/50p, 720/59.94p, 720/50p, 1080/59.94i, 1080/50i, 1080/59.94p, 1080/50p

RGB:(*2)

1024×768/60Hz(*1), 1280×720/60Hz(*1), 1280×800/60Hz(*1), 1280×1024/60Hz(*1), 1400×1050/60Hz, 1920×1080/60Hz

Composite

NTSC, PAL

*Note

*1 Output refresh rate is 75 Hz when frame rate is set to 50 Hz.

*2 Conforms to CEA-861-E or VESA DMT Version 1.0 Revision 11.

* The video signal frame rate must match the unit’s frame rate setting.

* The output format of HDMI and RGB/Component is always the same.

When a Video format is selected, component signal is output from the RGB/COMPONENT connector.

When a RGB format is selected, RGB signal is output from the RGB/COMPONENT connector.

USB-VIDEO

480/29.97p, 576/25p, 480/59.94p, 576/50p, 720/29.97p, 720/25p, 720/59.94p, 720/50p, 1080/29.97p, 1080/25p, 1080/59.94p, 1080/50p

Still Image

Windows(R) Bitmap File (.bmp)

* Maximum 1920 x 1080 pixels, 24-bit per pixel, uncompressed.

Effets

Transition: Mix, Cut, Wipe (9 patterns)

Composition: PinP, Chrominance Key, Luminance Key

Autres: Output Fade, Output Freeze, User Logo

Audio

Processus Audio

Sampling Rate: 24-bit/48 kHz

Input Connectors

AUDIO IN (1 to 4) jacks (XLR/TRS combo type)

* XLR type: 1 GND, 2 HOT, 3 COLD

* Phantom Power: DC 48 V (unloaded maximum), 5 mA (maximum load) (Current value per channel).

AUDIO IN (5 to 8) jacks (RCA phono type)

AUDIO IN (9 to 12) jacks (TRS type)

Connecteurs de sortie

AUDIO OUT L,R jacks (XLR-3-32 type)

* XLR type: 1 GND, 2 HOT, 3 COLD

AUDIO OUT L,R jacks (RCA phono type)

PHONES jack (Stereo 1/4-inch phone type) (headphones)

PHONES jack (Stereo miniature type) (headphones)

Niveau d’entrée

XLR/TRS: -68 to +4 dBu (Maximum: +22 dBu, 4 k ohms)

RCA phono: -10 dBu (Maximum: +8 dBu, 11 k ohms)

TRS: +4 dBu (Maximum: +22 dBu, 98 k ohms)

Niveau de sortie

XLR: +22 dBu (Maximum: +22 dBu, 600 ohms)

RCA phono: -10 dBu (Maximum: +8 dBu, 1 k ohms)

Headphones: 25 mW + 25 mW, 20 ohms

Formats Audio

SDI: Linear PCM, 24bit, 48kHz, 2ch

* SMPTE 299M, SMPTE 272M-C

HDMI: Linear PCM, 24bit, 48kHz, 2ch

USB-AUDIO: Linear PCM, 16bit, 48kHz, 2ch

Effets Audio

Channel Effects: Compressor, Noise Gate, 3-Band EQ, Delay

Master Effects: Mastering, 3-Band EQ, Reverb

Autres

Remote

Remote MIDI: 5 pin DIN type (IN, OUT/THRU)

RS-232C: D-sub 9 pin type x 1

USB Interface

USB2.0 port(host): Hi-Speed USB: Type A (for USB memory)

USB3.0 port(device): Type B for USB-VIDEO (Super-Speed/Hi-Speed), USB-AUDIO (Full-Speed)

– Uncompressed Video   4:2:2 (Y/Pb/Pr), 8-bit

– Bit-rate: max 2Gbit/s (1080/59.94p only active pixels)

– UVC (USB Video Class) supported uncompressed Video

– Certified USB3.0 cable is required when running at super-speed (anything at 720p or higher)

Display

7 inch Graphic color LCD 800 x 480 dots (touch screen)

Power Supply

AC Adaptor DC 24V Secondary AC Adaptor DC 9 V to 16 V (XLR-4-32 type)

Current Draw

2.5 A (DC 24V)

Operation Temperature

+0 to +40 degrees Celsius +32 to +104 degrees Fahrenheit

Accessoires

AC Adaptor, Power Cord, Owner’s Manual

System recommendations for recording (VR Capture) or streaming HD material

Windows

8.0 or higher

Mac

OS X 10.7 and higher

Common

Ivy Bridge Core i7 and higher

8GB Memory or more

USB 3.0 (supported USB3.0 Intel Chipset e.g. 7Series)

Note: USB Controller Chip by Renesas (formerly NEC) is not suitable

Current VR-50HD Streaming Software Compatibility list.

Taille et Poids

Largeur

434 mm

    17-1/8 inches

Profondeur

306 mm

    12-1/16 inches

Taille

149 mm

    5-7/8 inches

Poids

5.3 kg

    11 lbs. 11 oz.

Notes

* 0dBu=0.775 Vrms

* This product is a Class A digital device under FCC part 15.

* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.

* This product is intended for use in the following Electromagnetic environments: E1:residential, E2:commercial and light industrial, E3:urban outdoors, E4:controlled EMC environment, ex. recording studio (broadcasting studio) which are specified in EN55103-1 and EN55103-2.